Username - Avaya G250 Reference

Related commands - Policy-based routing
destination-ip, dscp (policy, policy-based routing, packet
capture-list, source-ip,
Related commands - Policy
composite-operation, destination-ip,
show composite-operation,
established, tcp

username

Use the username command to add a local user account. Use the no form of the command to
remove the user account from the system.
By default there is only a single user account, named root, with password root, which accesses
the administrator level. You cannot delete this basic user account, nor modify its access level.
But you can modify its basic password.
Note:
For security reasons, you should change the root password immediately.
Note:
Syntax
username name password passwd access-type access_type
no username name
Parameters
Parameter
name
passwd
access_type
User level
admin
Context
general
tcp destination-port,
dscp (policy, policy-based routing, packet
show dscp-table,
source-port, udp destination-port
Description
New user name
User's password
Access type definition
Alphabetical listing of CLI commands
sniffing), icmp, ip-protocol,
tcp source-port, udp destination-port
show ip-rule, source-ip,
Possible Values
minimum four character
string
minimum four character string
read-only, read-write, admin
show ip
sniffing), icmp,
tcp destination-port, tcp
Default
Value
Issue 1.1 June 2005 793