Set Port Level - Avaya G250 Reference

set port level

Use the set port level command to set the priority level of a port or range of ports on the
switching bus. Packets traveling through a port set at normal priority are served only after
packets traveling through a port set at high priority are served.
Syntax
set port level module/port [value]
Parameters
Parameter
module
port
value
User level
read-write
Context
general
Example
To set the priority level of port 1 on module 3 to 5:
G350-147# set port level 3/1 5
Port 3/1 level set to 5
Related commands
set port auto-negotiation-flowcontrol-advertisement,
edge admin state,
port point-to-point admin
auto-negotiation-flowcontrol-advertisement,
Description
Number of the module
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 4/5-13 for
ports 5 to 13 on module 4.
Priority level
set port enable, set port
status, set port
Alphabetical listing of CLI commands
set port disable,
flowcontrol, set port
speed, show port
show port edge state,
Possible Default
Values Value
0-7
set port duplex,
name, set port negotiation,
show port flowcontrol
Issue 1.1 June 2005
set port
set
445