Ip Ospf Cost - Avaya G250 Reference

ip ospf cost

Use the ip ospf cost command to statically configure the interface cost metric. Use the no
form of this command to return to dynamic calculation of the cost.
Syntax
ip ospf cost cost
no ip ospf cost
Parameters
Parameter
cost
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3), VLAN (L2-L3, L3), Loopback (L2-L3,
L3), Tunnel (L3, L2-L3)
Example
To set the cost metric for the VLAN 1 interface to 10:
G350-001(if:Vlan 1)# ip ospf cost 10
Related commands
ip ospf authentication,
ospf message-digest-key,
router ospf, show ip
show ip protocols
Description
The price assigned to each interface for the
purpose of determining the shortest path.
ip ospf authentication-key,
ip ospf network
ospf, show ip ospf database,
Alphabetical listing of CLI commands
ip ospf dead-interval,
point-to-multipoint, ip ospf
show ip ospf interface,
Possible Default
Values Value
1-65535 1
ip ospf hello-interval,
priority, ip ospf router-id,
show ip ospf neighbor,
Issue 1.1 June 2005
ip
259