Show Ip Qos-List - Avaya G250 Reference

CLI Commands
Related commands - RIP
ip distribution access-list,
default-route-mode,
split-horizon, router rip

show ip qos-list

Use the show ip qos-list command to display the attributes about a specific QoS list, or all
QoS lists, for the current interface.
Note:
To specify an interface name that includes spaces, enclose the entire name in
Note:
quotation marks (for example, "FastEthernet 10/2").
Syntax
show ip qos-list {list_number | all | active-list-in | active-list-out
| active-list-in-out} [detailed]
Parameters
Parameter
list_number
all
active-list-in
active-list-out
active-list-in-
out
detailed
User level
read-write
Context
general, Interface: Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3), FastEthernet (L2, L2-L3), VLAN (L2, L2-L3), Loopback (L2,
L2-L3), Tunnel (L2, L2-L3)
612 Avaya G250 and Avaya G350 CLI Reference
ip rip authentication
ip rip poison-reverse,
Description
The QoS list to display
Keyword specifying to display all QoS lists
Keyword specifying to display lists for the in
direction
Keyword specifying to display lists for the
out direction
Keyword specifying to display lists for in and
out directions
Keyword specifying to display detailed
information
key, ip rip authentication
ip rip rip-version, ip rip
mode, ip rip
send-receive-mode, ip rip
Possible Default
Values Value