Traffic-Shape Rate; Transmitter-Delay - Avaya G250 Reference

traffic-shape rate

Use the traffic-shape rate command to configure traffic shaping for outbound traffic on
the current interface.
Syntax
traffic-shape rate bit_rate
Parameters
Parameter
bit_rate
User level
read-write
Context
Interface: FastEthernet(L2, L2-L3)
Example
To set the traffic-shaping rate to 128000:
G350-001(if:FastEthernet 10/2)# traffic-shape rate 128000
Related commands
autoneg, duplex,

transmitter-delay

Use the transmitter-delay command to set the minimum number of flags to be sent
between successive packets. Use the no form of the command to restore the transmitter-delay
value to the default of 0.
Syntax
transmitter-delay number
no transmitter-delay
Description
The bit-rate that traffic is shaped to, in bits
per second
shutdown (interface),
Alphabetical listing of CLI commands
speed (interface)
Possible Default
Values Value
64000-2048000
Issue 1.1 June 2005 779