ip http
Use the ip http command to enable the HTTP server. Use the no form of the command to
disable the HTTP server.
Note:
This command is not supported by the G250.
Note:
Syntax
ip http [port port_number]
[no] ip http
Parameters
Parameter
port
port_number
User level
admin
Context
general
ip icmp
Use the ip icmp command to enable ICMP services. Use the no form of the command to
disable ICMP services.
Syntax
ip icmp [echo]
no ip icmp
Description
Keyword that changes the
default port of the HTTP server
The number of the new port for
the HTTP server
Alphabetical listing of CLI commands
Possible
Default
Values
Value
1-65535
80
Issue 1.1 June 2005
251