Value - Avaya G250 Reference

CLI Commands
Example
To create a new user account with username john, password johnny and access type of
read-write:
G350-001(super)# username john password johnny access-type read-write
User account added.
You cannot change the access type of the root user:
G350-001(super)# username root password secret access-type read-write
ERROR: User account root has always an administrator access type.
To change the password of the root user:
G350-001(super)# username root password secret access-type admin
User account modified.
Note:
If you wish to define a name which includes spaces, you must enclose the entire
Note:
name in quotation marks, for example "new york".
Related commands
show username

value

Use the value command to set the value of a DHCP option or a vendor-specific option. Use the
no form of this command to clear the vendor-specific value.
Syntax
[no] value
Parameters
Parameter
raw
type
value
794 Avaya G250 and Avaya G350 CLI Reference
raw type value
Description
Non-encapsulated value
Type of sub-option
The sub-option value
Possible Values
ascii — ASCII
hex string —
hexadecimal
ip-address — IP
address
word — 16 bit
number
integer — 32 bit
number
Default Value