ip peer address
Use the ip peer address command to change the IP address offered by the Console or
USB interface to a requesting calling host during PPP/IPCP connection establishment. By
default, the interface offers its own IP address plus one.
Syntax
ip peer address ip-address
Parameters
Parameter
ip-address
User level
read-write
Context
Interface: Console, USB
Example
To configure the USB interface to offer requesting calling hosts the IP address 192.168.49.2:
G350-001(super-if:USB-Modem)# ip peer address 192.168.49.2
Related commands
async mode
interactive,
authentication,
Description
The IP address offered
async mode
shutdown
(interface),
Possible Values
IP address
terminal,
async
modem-type,
speed
(PPP),
timeout absolute
Alphabetical listing of CLI commands
Default Value
The interface IP
address plus one
ip
address,
ppp
Issue 1.1 June 2005
267