Set Spantree Enable/Disable - Avaya G250 Reference

CLI Commands

set spantree enable/disable

Use the set spantree command to enable or disable the spanning-tree algorithm for the
media gateway.
Note:
When you disable spanning tree, blocking ports are disabled in order to prevent
Note:
loops in the network. As a result, you need to wait 30 seconds before disabling
spanning tree if you reset the media gateway, enable spanning tree, or insert a
new station.
Note:
This command is not supported by the G250.
Note:
Syntax
set spantree {enable|disable}
Parameters
Parameter
enable
disable
User level
read-write
Context
general
Example
To enable spanning tree:
G350-147# set spantree enable
bridge spanning tree enabled.
To disable spanning tree:
G350-147# set spantree disable
bridge spanning tree disabled.
490 Avaya G250 and Avaya G350 CLI Reference
Description
Keyword specifying to enable the
spanning-tree algorithm
Keyword specifying to disable the
spanning-tree algorithm
Possible Default
Values Value