Show Powerinline - Avaya G250 Reference

Related commands
clear port static-vlan,
port vlan-binding-mode,
trunk, show vlan

show powerinline

Use the show powerinline command to display the current inline power status of the
specified module or port. If no port is specified, information for all ports is displayed.
Syntax
show powerinline [module_number/port_number]
Parameters
Parameter
module_number
port_number
User level
read-only
Context
general
Example
To display power information for ports on module 6 of the G350:
G350-001(super)# show powerinline 6
Actual powerinline power consumption is 30W.
Powerinline power consumption trap threshold is 207 (99%) Watts.
Powerinline traps are enabled
Port Inline Operational Status
---- -------------------------
6/1 Fault
6/2 Searching
clear vlan, icc-vlan, interface
set trunk, set vlan,
Description
The module number
The port number
Alphabetical listing of CLI commands
vlan, set port static-vlan,
show cam vlan, show port
Powering Priority
-----------------
Low
Low
set port vlan, set
vlan-binding-mode, show
Possible Default
Values Value
PD Type
--------
telephone
telephone
Issue 1.1 June 2005 675