Tunnel Destination - Avaya G250 Reference

CLI Commands

tunnel destination

Use the tunnel destination command to specify the destination IP address for the GRE
tunnel. The destination is the IP address of the tunnel's endpoint.
Note:
The CLI does not verify that the specified IP address actually exists.
Note:
Syntax
tunnel destination ip-address
Parameters
Parameter
ip-address
User level
read-write
Context
Interface: Tunnel (L2, L2-L3)
Example
G350-001(super)# tunnel destination 168.30.10.2
Related commands
keepalive (GRE
source, tunnel ttl
782 Avaya G250 and Avaya G350 CLI Reference
Description
The destination IP address for the GRE tunnel
tunnel), tunnel checksum, tunnel key, tunnel path-mtu-discovery,
Possible Default
Values Value
tunnel