Vendor-Specific-Option - Avaya G250 Reference

User level
read-write
Context
dhcp pool vendor specific, dhcp pool option
Example
To specify IP addresses for World Wide Web servers (DHCP option 72):
G350-001(dhcp 5/option 72)# value raw ip-address "135.64.102.1,
135.64.102.2"
To enable IP forwarding (DHCP option 19 specifies whether the client should configure its IP
layer for packet forwarding):
G350-001(dhcp 5/option 19)# value raw hex 01
To set a non-encapsulated value in ASCII format for vendor-specific option 1:
G350-001(DHCP 5/vendor specific 1)# value raw ascii
"MCIPADD=10.10.2.140,MCPORT=1719,TFTPSRVR=10.10.5.188"
To set a non-encapsulated value in Hex format for vendor-specific option 1:
G350-001(DHCP 5/vendor specific 1)# value raw hex
00:00:11:22:33:44:55:66:77
Related commands
bootfile, class-identifier, client-identifier, default-router, dns-server, domain-name, end-ip-addr,
lease, name, next-server, option, server-name,

vendor-specific-option

vendor-specific-option
A vendor specific option is an option unique to an individual vendor class. Use the
vendor-specific-option command to set a vendor specific option. Use the no form of this
command to delete a vendor-specific option.
Syntax
[no] vendor-specific-option index-num
Parameters
Parameter
index-num
Description
The index number of the
vendor-specific option
Alphabetical listing of CLI commands
show ip dhcp-pool, start-ip-addr, subnet-mask,
Possible Values
1-10
Default Value
Issue 1.1 June 2005 795