Show Logging File Content - Avaya G250 Reference

CLI Commands
Example
To show information about conditions that are defined for the file output:
G350-001(super)# show logging file condition
******************************************************
*** Message logging configuration of FILE
Sink Is Enabled
Sink default severity: Informational
Facility
-------------------------------------------
FAN
VLAN
Related commands
copy ftp startup-config,
startup-config,
startup-config
status, show download

show logging file content

Use the show logging file content command to output the messages in the log file to
the CLI console. The output is arranged with the most recent event first. The content of the file
is output according to the current filter settings and user access.
Syntax
show logging file content [severity] [all|Msgfacility] [number]
Parameters
Parameter
severity
all
Msgfacility
number
644 Avaya G250 and Avaya G350 CLI Reference
! Severity Override
! Error
! Critical
copy running-config
copy running-config tftp,
tftp, copy tftp startup-config,
status, show erase
Description
Minimal severity of messages to be displayed
Keyword specifying to display messages from
all facilities
Display messages from this facility only
Maximum number of messages to display
ftp, copy running-config
copy startup-config ftp,
erase startup-config,
status, show running-config,
sink ***
scp, copy running-config
copy startup-config scp,
nvram initialize, show copy
show startup-config
Possible Default
Values Value
copy