Ip Rip Authentication Mode - Avaya G250 Reference

CLI Commands
Parameters
Parameter
password
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3), VLAN (L2-L3, L3), Loopback (L2-L3,
L3), Tunnel (L2-L3, L3)
Example
To set the authentication string on the VLAN 1 interface to "hush-hush":
G350-001(if:Vlan 1)# ip rip authentication key hush-hush
Related commands
ip distribution access-list,
poison-reverse,
ip protocols

ip rip authentication mode

Use the ip rip authentication mode command to specify the type of authentication used
in RIP Version 2 packets. Use the no form of this command to restore the default value, none.
Syntax
ip rip authentication mode [simple|none]
no ip rip authentication mode
272 Avaya G250 and Avaya G350 CLI Reference
Description
The authentication string for the interface
ip rip authentication
ip rip rip-version, ip rip
mode, ip rip default-route-mode,
send-receive-mode, ip rip
Possible Default
Values Value
string
(1-16 chars)
ip rip
split-horizon, router rip, show