Udp Destination-Port - Avaya G250 Reference

CLI Commands
Related commands
dscp (object tracking), fail-retries, frequency,
success-retries,

udp destination-port

Use the udp destination-port command to define a destination port with the UDP protocol
for which to apply the current rule. Use the no form of the command to specify that the rule
applies to all ports other than the defined port.
Note:
Issuing this command also sets the protocol to be UDP, if it is not already.
Note:
Syntax
udp destination-port any | {{eq | lt | gt}
{port_name | port_number}} | {range start_port end_port}
Parameters
Parameter
any
eq
lt
gt
port_name
port_number
range
790 Avaya G250 and Avaya G350 CLI Reference
wait-interval
Description
Keyword that specifies to apply the rule to a
port with any name or number
Keyword that specifies to apply the rule to a
port whose name or number matches exactly to
the specified name or number
Keyword that specifies to apply the rule to a
port whose name or number is less than the
specified name or number
Keyword that specifies to apply the rule to a
port whose name or number is greater than the
specified name or number
The name of the port for which to apply the rule
The number of the port for which to apply the
rule
Keyword indicating that a range of ports is
specified
next-hop (object tracking), rtr, source-address,
Possible Default
Values Value