Set Max-Ip-Registrations - Avaya G250 Reference

CLI Commands

set max-ip-registrations

Use the set max-ip-registrations command to configure the maximum IP registrations
allowed in the SLS data set on the G250.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Note:
Since the VoIP resource on the G250 are limited, the maximum IP registrations
Note:
should not be set for more than 10.
Syntax
set max-ip-registrations number
Parameters
Parameter
number
User level
read-write
Context
You must be in the survivable-call-engine context before the set max-ip-registrations
command will work.
Example
G250-001(super-survivable-call-engine)# set max-ip-registrations 10
Maximum IP Registrations is set to 10
Related commands
add trunk-group,
trunk-group, remove
extension, set
trunk-group, show
ip-codec-set, show
show trunk-group,
426 Avaya G250 and Avaya G350 CLI Reference
Description
Maximum number of IP registrations
clear ars-fac, clear
trunk-group, save
extension-password, set
ars-fac, show date-format,
last-pim-update,
survivable-call-engine
survivable-config, clear
config, set ars-fac,
ip-codec-set, set survivable-call-engine,
show dial-pattern,
show max-ip-registrations,
Possible
Values
1-10
dial-pattern, clear extension,
set date-format, set dial-pattern,
show extension,
show survivable-call-engine,
Default
Value
8
clear
set
set
show