Show Restart-Log - Avaya G250 Reference

CLI Commands
Related commands
set utilization cpu,
restart-log, show
voltages, test led

show restart-log

Use the show restart-log command to retrieve restart data that is stored in a log in flash
memory.
Syntax
show restart-log
User level
read-only
Context
general
Example
To display restart information:
G350-001(super)# show restart-log
RESET ID MM/DD-hh:mm:ss.hs STR
---------- ------------------- ------------------------------------
0000000000 01/01-02:54:17.00 MgFw#:48.46.48 REBOOT
0000000000 01/01-02:54:12.00 MgFw#:48.46.48 WWD-STYCRINO-XXXXX REBOOT
from RecoveryEngineUti
EOF
Related commands
set utilization cpu,
recovery, show
test led
684 Avaya G250 and Avaya G350 CLI Reference
show faults, show mg
status, show system,
show faults, show mg
status, show system, show
list_config, show mgc,
show temp, show timeout,
list_config, show mgc,
temp, show timeout,
show mm, show module,
show utilization, show
show mm, show module,
show utilization, show
show
show
voltages,