Set Port Enable - Avaya G250 Reference

CLI Commands

set port enable

Use the set port enable command to enable a port or a range of ports.
Syntax
set port enable [module/port]
Parameters
Parameter
module
port
User level
read-write
Context
general
Example
To enable port 3 of module 10:
G350-147# set port enable 10/3
Port 10/3 enabled.
Related commands
set port auto-negotiation-flowcontrol-advertisement,
edge admin state,
point-to-point admin
auto-negotiation-flowcontrol-advertisement,
442 Avaya G250 and Avaya G350 CLI Reference
Description
Number of the module
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 4/5-13 for
ports 5 to 13 on module 4.
set port flowcontrol, set port
status, set port speed,
set port disable,
level, set port name,
show port
show port edge state,
Possible Default
Values Value
set port duplex, set port
set port negotiation, set port
show port flowcontrol