Ip Ssh - Avaya G250 Reference

CLI Commands
Related commands - SNMP access configuration
set snmp community,
snmp engineID,
show snmp user
snmp-server engineID,
snmp-server view
Related commands - SNMP trap configuration
clear snmp trap,
enable notifications,
Related commands - Dynamic trap manager
snmp-server dynamic-trap-manager

ip ssh

Use the ip ssh command to enable the Secure Shell (SSH) service. SSH is a security
protocol that enables you to establish a remote session over a secured tunnel, also called a
remote shell. Use the no form of the command to disable the SSH service, and close any open
connections currently using SSH. When disabling the service, the G250/G350 issues a
message listing all current management interfaces. If SSH is currently the only enabled
management interface, the user is warned that the remote connection will be lost.
Note:
For normal execution of SSH protocol, the G250/G350 must first be assigned
Note:
host name identification. Use the hostname command to assign host name
identification.
Note:
In order to enable SSH to be used, you must configure the server host key. See
Note:
the crypto-key generate command.
Syntax
[no] ip ssh
User level
admin
Context
general
Related commands
clear ssh-client
288 Avaya G250 and Avaya G350 CLI Reference
set snmp retries,
show snmp group, show snmp
summary, show snmp
snmp-server group,
set port trap, set snmp
snmp-server host,
known-hosts, crypto key
set snmp timeout, show port
retries, show snmp
usertogroup, show snmp
snmp-server remote-user,
trap, show snmp, snmp trap
snmp-server informs
generate, disconnect
trap, show snmp,
timeout, show snmp
view, snmp-server community,
snmp-server user,
link-status, snmp-server
ssh, show ip ssh
show
user,