Set Lldp System-Control - Avaya G250 Reference

Related commands
set lldp system-control,
lldp, set port lldp
config

set lldp system-control

Use the set lldp system-control command to enable or disable the LLDP application
globally (per device or stack).
Syntax
set lldp system-control enable|disable
Parameters
Parameter
enable
disable
User level
read-write
Context
General
Example
G250-001(super)# set lldp system-control enable
Related commands
set lldp re-init-delay,
set port lldp tlv,
config
set lldp tx-delay,
tlv, show lldp, show lldp
Description
Enable the LLDP application
Disable the LLDP application
set lldp tx-delay,
show lldp, show lldp config,
set lldp tx-hold-multiplier,
config, show port lldp
set lldp tx-hold-multiplier,
show port lldp config,
Alphabetical listing of CLI commands
set lldp tx-interval,
config, show port lldp vlan-name
Possible
Values
set lldp tx-interval,
show port lldp vlan-name
Issue 1.1 June 2005
set port
Default
Value
set port lldp,
413