Dialer Persistent Initial Delay - Avaya G250 Reference

CLI Commands
Parameters
Parameter
sec
User level
read-write
Context
interface dialer
Example
G350-001(if:Dialer 1)# dialer persistent delay 20
Related commands
interface dialer,
delay, dialer persistent
wait-for-ipcp

dialer persistent initial delay

Use the dialer persistent initial delay command to set the minimum delay from
boot to persistent dialing. Use the no form of the command to return the delay to the default
value.
Note:
Use this command to prevent the Dialer interface from dialing out after the G250/
Note:
G350 is reset because the primary interface does not become active immediately
after the reset.
Syntax
[no] dialer persistent initial delay sec
Parameters
Parameter
sec
164 Avaya G250 and Avaya G350 CLI Reference
Description
Redial interval
dialer modem-interface,
max-attempts,
Description
Initial delay
dialer order, dialer persistent,
dialer persistent re-enable,
Possible Default
Values Value
1-1000 20
dialer persistent initial
dialer string, dialer
Possible Default
Values Value
1-1000 1