Bc Out - Avaya G250 Reference

CLI Commands
Note:
Before creating a new banner, delete the current banner using the no banner
Note:
post-login command.
Syntax
[no] banner post-login
User level
admin
Context
general
Example
To enter the post-login banner configuration mode:
G350-001(super)# banner post-login
G350-001(super-post-login)#
Related commands
banner login, clear
length, terminal width

bc out

Use the bc out command to configure the committed burst size in bits, for the outbound
direction. Use the no form of this command to return the committed burst size to its default
value.
Note:
The time interval used in the frame relay meter is: (BC/CIR)*1000, where BC is
Note:
the committed burst size, and CIR is the committed information rate. The
minimum time interval is 10ms, and the device will prevent setting the BC and
CIR in a way that violates this minimum.
Syntax
bc out bits
no bc out
50 Avaya G250 and Avaya G350 CLI Reference
screen, hostname, line, show banner login, show banner post-login, terminal