Ip Pbr-Group - Avaya G250 Reference

User level
read-write
Context
general
Example
To set the IP address of the router interface to 192.168.49.1:
G350-001(super)# ip ospf router-id 192.168.49.1
Related commands
ip ospf authentication,
hello-interval, ip ospf
router ospf, show ip
show ip protocols

ip pbr-group

Use the ip pbr-group command to apply the specified pbr list to the current interface. The
pbr list is applied to ingress packets only. Use the no form of the command to disable the
specified pbr list.
Syntax
ip pbr-group list_number
Parameters
Parameter
list_number
User level
read-write
ip ospf authentication-key,
message-digest-key,
ospf, show ip ospf database,
Description
The list number of the pbr list to
be applied to ingress packets of
the current interface
Alphabetical listing of CLI commands
ip ospf cost, ip ospf
ip ospf network point-to-multipoint,
show ip ospf interface,
Possible
Values
801-899
dead-interval, ip ospf
ip ospf priority,
show ip ospf neighbor,
Default
Value
Issue 1.1 June 2005 265