Autoneg; Backup Delay - Avaya G250 Reference

CLI Commands

autoneg

Use the autoneg command to set the port speed and duplex to auto-negotiation mode for the
external Fast Ethernet port. Use the no form of this command to disable auto-negotiation mode.
Syntax
[no] autoneg
User level
read-write
Context
Interface: FastEthernet (L2, L2-L3)
Related commands
duplex, shutdown

backup delay

Use the backup delay command to set the time to wait before switching to the backup
interface, in case of failure.
Syntax
backup delay failure_delay secondary_disable_delay
Parameters
Parameter
failure_delay
secondary_disable_
delay
User level
read-write
46 Avaya G250 and Avaya G350 CLI Reference
(interface), speed (interface),
Description
The delay before switching to the backup
interface, in seconds
The delay before reverting to the primary
interface, in seconds
traffic-shape rate
Possible Default
Values Value
0-3600 0
0-3600 0