show ip traffic
Use the show ip traffic command to display IP counters information.
Syntax
show ip traffic [protocol_type]
Parameters
Parameter
protocol_type
User level
read-only
Context
general
Example
To display traffic information for all protocols:
G350-001(super)# show ip traffic
IP statistics:
Received:
5644 total, 4012 local destination
0 bad hop count, 0 packet header errors
0 unknown protocol, 0 address errors
1632 discarded
Fragments:
0 reassembled, 0 timeouts
0 couldn't reassemble, 0 fragmented
Sent:
4014 generated, 0 forwarded
0 no route, 0 discarded
ICMP statistics:
Received:
Description
The type of IP protocol for which to
display information
Alphabetical listing of CLI commands
Possible
Default
Values
Value
arp,
bootp-dhcp,
icmp, ip,
ospf
Issue 1.1 June 2005
629