Related commands
show port classification
set port disable
Use the set port disable command to disable a port or range of ports.
Syntax
set port disable module/port
Parameters
Parameter
module
port
User level
read-write
Context
general
Example
To disable port 1 on module 4:
G350-001(super)# set port disable 4/1
Port 4/1 disabled.
Related commands
set port
auto-negotiation-flowcontrol-advertisement,
set port
enable,
point-to-point admin
auto-negotiation-flowcontrol-advertisement,
Description
Number of the module
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 4/5-13 for
ports 5 to 13 on module 4.
set port
flowcontrol,
set port
status,
set port
speed,
Alphabetical listing of CLI commands
set port
duplex,
level,
set port
name,
show port
show port edge
state,
Possible
Default
Values
Value
set port edge admin
set port
negotiation,
set port
show port flowcontrol
Issue 1.1 June 2005
state,
435