Release Voip-Dsp - Avaya G250 Reference

CLI Commands
Parameters
Parameter
interface-type
interface-identifier
User level
read-write
Context
general
Example
G350-001(super)# release dhcp FastEthernet 10/2
Related commands
clear ip dhcp-client
ip dhcp client lease,
statistics

release voip-dsp

Use the release voip-dsp command to end a BTR test on the VoIP engine.
Note:
Status changes that occur during the test create SNMP traps.
Note:
Note:
View the results of the most recent BTR test with the show mm command (refer
Note:
to show mm
Syntax
release voip-dsp
User level
read-write
364 Avaya G250 and Avaya G350 CLI Reference
Description
The type of interface
The interface identifier
statistics, ip address dhcp,
ip dhcp client request,
on page 653).
Possible Values
FastEthernet
module number/
port number
ip dhcp client client-id,
renew dhcp, show ip dhcp-client,
Default
Value
ip dhcp client hostname,
show ip dhcp-client