Rtp-Stat Qos-Trap - Avaya G250 Reference

CLI Commands

rtp-stat qos-trap

Use the rtp-stat qos-trap command to enable the RTP statistics application to
automatically generate QoS traps upon the terminations of RTP streams in which one or more
QoS event counters exceeded their configured thresholds. The traps are sent by an SNMP
agent to the SNMP trap manager on the Media Gateway Controller (MGC) They are converted
to syslog messages and stored in the messages file on the MGC. Use the no form of this
command to disable QoS traps. By default, QoS traps are enabled.
Syntax
[no] rtp-stat qos-trap
User Level
read-write
Context
General
Example
To enable QoS traps:
G350-001(super)#
The RTP statistics QoS trap is enabled
To disable QoS traps:
G350-001(super)# no rtp-stat qos-trap
The RTP statistics QoS trap is disabled.
Related commands
rtp-stat clear, rtp-stat
qos-trap-rate-limit,
detailed, show rtp-stat
380 Avaya G250 and Avaya G350 CLI Reference
rtp-stat qos-trap
event-threshold, rtp-stat
rtp-stat service, rtp-stat
sessions, show rtp-stat
fault, rtp-stat min-stat-win,
threshold, show rtp-stat
summary, show rtp-stat thresholds
rtp-stat
config, show rtp-stat