Set Sync Interface - Avaya G250 Reference

CLI Commands

set sync interface

Use the set sync interface command to define the specified module and port as a
potential source for clock synchronization for the media gateway.
Syntax
set sync interface {primary | secondary} mmID [portID]
Parameters
Parameter
primary
secondary
mmID
portID
User level
read-write
Context
general
Example
To specify that ports 1, 3, 5, 6, 7, and 8 of Media Module 2 are used for normal failover:
G350-001(super)# set sync interface primary v2 1,3,5-8
Related commands
clear sync interface,
498 Avaya G250 and Avaya G350 CLI Reference
Description
Keyword that specifies normal failover
Keyword that specifies to override normal
failover, generate a trap, and assert a fault
The Media Module ID number of a stratum
clock source, of the form "vn" where "n" is
the slot number
Port or port range for an ISDN clock source
candidate
set sync source, set sync switching, show sync timing
Possible Default
Values Value