Show Capture - Avaya G250 Reference

CLI Commands
Context
general
Related commands
clear port static-vlan,
port vlan-binding-mode,
vlan

show capture

Use the show capture command to display information about the currently configured
settings for the packet sniffing service.
Note:
Timestamps in the capture file are based on the capture start time that is
Note:
displayed in the output of the show capture command.
Syntax
show capture
User level
read-only
Context
general
Example
G350-001(super)# show capture
The sniffing service is enabled
Capturing started at:
21:22:01, February 21, 2003 / 7,9:55:55 (uptime)
stopped at: not-stopped
Buffer size: 1000 KB
Buffer mode is cyclic
Maximum number of bytes captured from
each frame: 128
Packet filter: Capture List 503
Number of frames in buffer: 200
Size of capture file: 50 KB (5%)
516 Avaya G250 and Avaya G350 CLI Reference
clear vlan, icc-vlan, interface
set trunk, set vlan,
vlan, set port static-vlan,
show port vlan-binding-mode,
set port vlan, set
show trunk, show