Related commands - SNMP trap configuration
clear snmp
trap,
enable
notifications,
Related commands - Dynamic trap manager
snmp-server dynamic-trap-manager
source-address
Use the source-address command to set the source IP address for RTR operations. Use the
no form of this command to restore the default setting, which is to use the output interface's IP
address.
Note:
By default, the source-address command is disabled, and RTR operations
Note:
use the output interface's address.
Syntax
[no] source-address ip-address
Parameters
Parameter
ip-address
User level
read-write
Context
rtr type
Examples
G350-001(config-rtr icmp 1)# source-address 135.64.102.5
Related commands
dscp (object
tracking), fail-retries, frequency,
type,
wait-interval
set port
trap,
set snmp
snmp-server
host,
Description
The IP address to serve as the
source IP address for all RTR
operations
Alphabetical listing of CLI commands
trap,
show
snmp,
snmp trap
snmp-server informs
Possible Values
next-hop (object
link-status,
snmp-server
Default Value
tracking), rtr, success-retries,
Issue 1.1 June 2005
753