Ip Rip Default-Route-Mode - Avaya G250 Reference

Parameters
Parameter
simple
none
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3), VLAN (L2-L3, L3), Loopback (L2-L3,
L3), Tunnel (L2-L3, L3)
Example
To specify that RIP packets use simple authentication mode:
G350-001(if:FastEthernet 10/2)# ip rip authentication mode simple
Related commands
ip distribution access-list,
poison-reverse,
ip protocols

ip rip default-route-mode

Use the ip rip default-route-mode command to enable learning of the default route
received by the RIP protocol. Use the no form of this command to disable listening to default
routes.
Syntax
ip rip default-route-mode mode
no ip rip default-route-mode
Description
Keyword indicating that the clear text
authentication should be used
Keyword indicating that no authentication
should be used
ip rip authentication
ip rip rip-version, ip rip
Alphabetical listing of CLI commands
key, ip rip default-route-mode,
send-receive-mode, ip rip
Possible Default
Values Value
ip rip
split-horizon, router rip,
Issue 1.1 June 2005
show
273