Ip Ospf Router-Id - Avaya G250 Reference

CLI Commands
Parameters
Parameter
priority
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3), VLAN (L2-L3, L3), Loopback (L2-L3,
L3), Tunnel (L3, L2-L3)
Example
To set the interface OSPF priority to 17:
G350-001(if:Vlan 1)# ip ospf priority 17
Related commands
ip ospf authentication,
hello-interval,
router ospf, show ip
show ip protocols

ip ospf router-id

Use the ip ospf router-id command to configure the IP address of the router interface.
Syntax
ip ospf router-id router_id
Parameters
Parameter
router_id
264 Avaya G250 and Avaya G350 CLI Reference
Description
The interface priority
ip ospf authentication-key,
ip ospf message-digest-key,
ospf, show ip ospf
Description
The IP address of the router
ip ospf cost,
ip ospf network point-to-multipoint,
database, show ip ospf
Possible Default
Values Value
0-255 1
ip ospf dead-interval,
ip ospf
interface, show ip ospf
Possible Default Value
Values
lowest existing
IP interface
ip ospf
router-id,
neighbor,