Copy Tftp Sw_Imageb - Avaya G250 Reference

copy tftp SW_imageB

Use the copy tftp SW_imageB command to update the software image in Bank B of the
media gateway.
To use this command, you need to have an active TFTP server, and to create a file into which to
download the data. If Avaya Network Manager is running, an additional TFTP server is not
required.
Syntax
copy tftp SW_imageB filename ip
Parameters
Parameter
filename
ip
User level
read-write
Context
general
Example
To download the software file imgB.bin from the TFTP server 149.49.36.200 into boot bank B:
G350-001(super)# copy tftp SW_imageB c:\imgB.bin 149.49.36.200
Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
Related commands
copy ftp EW_archive,
EW_archive, copy tftp
download software
Description
The file name, including the full path
IP address of the host
copy ftp module, copy ftp
module, copy tftp SW_imageA, dir,
status, show image version
Alphabetical listing of CLI commands
Possible
Values
SW_imageA, copy ftp
set boot bank,
Default
Value
SW_imageB, copy tftp
show boot bank, show
Issue 1.1 June 2005 135