Ip Telnet-Client - Avaya G250 Reference

Parameters
Parameter
port
port_number
User level
admin
Context
genera
Related commands
ip telnet-client,

ip telnet-client

Use the ip telnet-client command to enable the Telnet client. Use the no form of the
command to disable the Telnet client.
Note:
For security reasons, this command can only be executed from the console port.
Note:
Note:
The ip telnet command is a secured command and will not be displayed
Note:
together with the running configuration (using the show running-config
command). To see the status of this command, use the show protocol
command (refer to
Syntax
[no] ip telnet-client
User level
admin
Description
Keyword that changes the default port of the
Telnet server
The number of the new port for the Telnet
server
telnet
show protocol
Alphabetical listing of CLI commands
on page 676).
Possible Default
Values Value
1-65535 23
Issue 1.1 June 2005 291