Set Port Name - Avaya G250 Reference

CLI Commands
To set up port mirroring from port 10/3 to port 10/5 in the G250 for all packets sent and received:
G250-001(super)# set port mirror source-port 10/3 mirror-port 10/5
sampling always direction both
Related commands
clear port mirror,

set port name

Use the set port name command to configure a name for a port. If you do not specify a
name, the port name displays as NO NAME.
Syntax
set port name module/port [name]
Parameter
Parameter
module
port
name
User level
read-write
Context
general
450 Avaya G250 and Avaya G350 CLI Reference
show port mirror
Description
Number of the module
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 4/5-13 for
ports 5 to 13 on module 4 on the G350, or
10/5-8 for ETH LAN ports 5 to 8 on the front
panel of the G250.
The port name
Possible Default
Values Value
maximum
16-character
string