Parameters
Parameter
session_id
User level
admin
Context
general
Related commands
clear ssh-client
distribution-list
Use the distribution-list command to apply a distribution policy rule for incoming or
outgoing routing information in route updates. Use the no form of this command to deactivate
the rule.
Syntax
[no] distribution-list access_list_number type [interface_type
interface_number|protocol]
Parameters
Parameter
access_list_
number
type
interface_
type
interface_
number
protocol
Description
The number of the SSH session to disconnect
known-hosts,
crypto key
Description
The number of the access list
The type of the access list
The interface type
The interface number
The protocol. This parameter is only
relevant for outgoing list entries.
Alphabetical listing of CLI commands
generate,
ip
ssh,
show ip ssh
Possible
Default
Values
Value
Possible
Default
Values
Value
1-99
in, out
static,
ospf
Issue 1.1 June 2005
171