Frame-Relay Lmi-N391Dte - Avaya G250 Reference

CLI Commands

frame-relay lmi-n391dte

Use the frame-relay lmi-n391dte command to set the number of status enquiry intervals
that pass before issuing a full status enquiry message.
Use the no form of this command to set the number of status enquiry intervals to its default.
Syntax
[no] frame-relay lmi-n391dte polling_interval
Parameters
Parameter
polling_
interval
User level
read-write
Context
Interface: Serial (DS1 FR L2, USP FR L2)
Example
To set the number of seconds between status enquiry messages to 17 seconds:
G350-001(if:Serial 2/1:1)# frame-relay lmi-n391dte 17
Related commands
encapsulation,
frame-relay lmi-type,
196 Avaya G250 and Avaya G350 CLI Reference
Description
Interval in seconds
frame-relay interface-dlci,
frame-relay priority-dlci-group,
frame-relay lmi-n392dte,
frame-relay
Possible Default
Values Value
1-255 6
frame-relay lmi-n393dte,
traffic-shaping, ip address