Rtr - Avaya G250 Reference

CLI Commands

rtr

Use the rtr command to enter RTR configuration mode and specify an identification number
for an RTR operation. Use the no form of this command to delete the RTR.
Note:
You cannot enter configuration mode for a specific RTR if this RTR is currently
Note:
probing an object. You must first deactivate the RTR using the no
rtr-schedule command.
Note:
You cannot delete an RTR being monitored by an object tracker. You must first
Note:
remove the link between them, using the no track track-id command.
Syntax
rtr rtr-id
Parameters
Parameter
rtr-id
User level
read-write
Context
general
Example
G350-001(config)# rtr 1
Related commands
rtr-schedule, show rtr
386 Avaya G250 and Avaya G350 CLI Reference
Description
The RTR ID
configuration, show rtr
Possible Values
1-30
operational-state, type
Default Value