Copy Tftp Startup-Config - Avaya G250 Reference

copy tftp startup-config

Use the copy tftp startup-config command to copy the media gateway configuration
from the saved TFTP file to the Startup Configuration NVRAM.
To use this command, you need to have an active TFTP server, and to create a file into which to
download the data. If Avaya Network Manager is running, an additional TFTP server is not
required.
Syntax
copy tftp startup-config filename ip
Parameters
Parameter
filename
ip
User level
read-write
Context
general
Example
To copy the configuration file router1.cfg from the TFTP server 192.168.49.10 into the startup
configuration:
G350-001(super)# copy tftp startup-config c:\G350\router1.cfg
192.168.49.10
Related commands
copy ftp startup-config,
startup-config,
startup-config tftp,
status, show erase
Description
The file name, including the full path
The IP address of the host
copy running-config
copy running-config tftp,
erase startup-config,
status, show logging file
Alphabetical listing of CLI commands
ftp, copy running-config
copy startup-config ftp,
nvram initialize, show copy
condition, show running-config,
Possible Default
Values Value
scp, copy running-config
copy startup-config scp,
status, show download
show startup-config
Issue 1.1 June 2005
copy
133