capture filter-group
Use the capture filter-group command to apply the specified filter to the packet sniffer.
When a capture filter is applied, packets must match the criteria for a rule whose action is
'capture' in order to be saved to the buffer.
Syntax
capture filter-group capture_list_id
Parameters
Parameter
capture_list_id
User level
read-write
Context
general
Example
G350-001(super)# capture filter-group 501
Related commands
capture
buffer-mode,
start,
capture
stop, capture-service,
show capture-buffer hex
capture interface
Use the capture interface command to specify the interface on which to run the packet
sniffing service. Use the no form of the command to run packet sniffing on all routing interfaces.
Syntax
capture interface interface_name
no capture interface
Description
The capture list number to apply
capture
buffer-size,
capture
clear
capture-buffer,
Alphabetical listing of CLI commands
Possible Values
500-599
interface,
capture
max-frame-size,
ip
capture-list, name,
Default Value
capture
show
capture,
Issue 1.1 June 2005
57