CLI Commands
shutdown (USB modem)
Use the shutdown command to disable the USB interface. When the interface is disabled, calls
to the modem are immediately hung up. No PPP initialization is performed, and there is no
access to the device.
Use the no form of this command to enable the USB interface. For security reasons, the USB
interface is disabled by default. The USB modem can only be connected after the interface is
manually brought up using this command.
Note:
This command is not supported by the G250.
Note:
Syntax
[no] shutdown
User level
For shutdown: read-write
For no shutdown: admin
Context
interface USB
Example
G350-001(super-if:USB-Modem)# shutdown
Related commands
async reset-modem (USB
speed
(PPP),
736 Avaya G250 and Avaya G350 CLI Reference
port),
ip
address,
timeout absolute
ppp
authentication,
shutdown (USB
modem),