Ip-Protocol - Avaya G250 Reference

CLI Commands

ip-protocol

Use the ip-protocol command to specify that the current rule applies to packets having the
specified IP protocol. Use the no form of this command to specify that the current rule applies to
all packets except those having the specified IP protocol.
Syntax
[no] ip-protocol protocol_name | protocol_number
Parameters
Parameter
protocol_name
protocol_number
User level
read-write
Context
ip access-control-list/ip-rule, ip capture-list/ip-rule, ip pbr-list/ip-rule, ip qos-list/ip-rule
Example
To specify that rule 22 applies to all packets having an IP protocol of IGMP:
G350-001(ACL 330/ip rule 22)# ip-protocol icmp
Related commands
destination-ip,
source-ip, tcp
304 Avaya G250 and Avaya G350 CLI Reference
Description
Name of the IP protocol to match
Number of the IP protocol to match
dscp (policy, policy-based routing, packet
destination-port, tcp source-port,
sniffing), icmp,
udp destination-port, udp source-port
Possible Default
Values Value
1-255
show ip capture-list,