Frame-Relay Interface-Dlci - Avaya G250 Reference

frame-relay interface-dlci

Use the frame-relay interface-dlci command to associate a frame relay Virtual
Channel with this interface. This VC will be in the primary role (that is, will determine the
operational status of the interface).
Use the no form of this command to delete the association of the VC and the sub-interface. To
replace the currently configured interface-DLCI, use the no form of the command.
Syntax
[no] frame-relay interface-dlci DLCI_number
Parameters
Parameter
DLCI_number
User level
read-write
Context
Interface: Serial (DS1 FR-SUB L2, DS1 FR-SUB L2-L3)
Example
The following example will create and associate DLCI number 17 with the current sub-interface.
This VC will carry all traffic (if no priority dlci-group is defined for this interface), and will be in the
primary role.
G350-001(super-if:Serial 2/1:1)# frame-relay interface-dlci 17
Related commands
encapsulation,
frame-relay lmi-type,
Description
The Virtual Channel Data Link Channel
Identifier
frame-relay lmi-n391dte,
frame-relay priority-dlci-group,
Alphabetical listing of CLI commands
frame-relay lmi-n392dte,
frame-relay
Possible Default
Values Value
16-1007
frame-relay lmi-n393dte,
traffic-shaping, ip address
Issue 1.1 June 2005 195