Survivable-Call-Engine - Avaya G250 Reference

survivable-call-engine

Use the survivable-call-engine command to enter the survivable-call-engine context. In
this context, you can administer the SLS data set from the G250 CLI.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
survivable-call-engine
User level
read-write
Context
general
Example
G250-001(super)# survivable-call-engine
G250-001(super-survivable-call-engine)#
Related commands
add trunk-group,
trunk-group, remove
extension, set extension-password,
survivable-call-engine,
show extension,
survivable-call-engine,
clear ars-fac, clear survivable-config,
trunk-group, save
set
set trunk-group,
show ip-codec-set, show
show trunk-group
Alphabetical listing of CLI commands
clear dial-pattern,
config, set ars-fac, set
ip-codec-set, set max-ip-registrations,
show ars-fac, show date-format,
last-pim-update, show
clear extension,
date-format, set dial-pattern,
set
show dial-pattern,
max-ip-registrations,
Issue 1.1 June 2005
clear
set
show
761