Show Survivable-Call-Engine - Avaya G250 Reference

Last Failure: No Error
Last Warning: (null)
Progress: [0/0]0%
Related commands
set utilization cpu,
recovery, show
voltages, test led

show survivable-call-engine

Use the show survivable-call-engine command to display SLS status (enabled or
disabled).
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
show survivable-call-engine
User level
read-write
Context
You must be in the survivable-call-engine context before the show
survivable-call-engine command will work.
Example
G250-001(super)# show survivable-call-engine
Survivable Call Engine is enabled.
Related commands
add trunk-group,
trunk-group, remove
extension, set extension-password,
survivable-call-engine,
show extension,
trunk-group, survivable-call-engine
show faults, show mg
restart-log, show system,
clear ars-fac, clear survivable-config,
trunk-group, save
set
set trunk-group,
show ip-codec-set, show
Alphabetical listing of CLI commands
list_config, show mgc,
show temp, show timeout,
clear dial-pattern,
config, set ars-fac, set
ip-codec-set, set max-ip-registrations,
show ars-fac, show date-format,
last-pim-update, show
show mm, show module,
show utilization,
clear extension,
date-format, set dial-pattern,
set
show dial-pattern,
max-ip-registrations,
Issue 1.1 June 2005
show
show
clear
set
show
715