Show Ip Access-Control-List - Avaya G250 Reference

CLI Commands
5 minute output rate 0 bits/sec, 0 packets/sec
0 input drops, 0 output drops, 0 unknown protocols
0 packets input, 0 bytes
0 broadcasts received, 0 giants
0 input errors, 0 CRC
0 packets output, 0 bytes
0 output errors, 0 collisions
Console asynchronous mode is terminal
Terminal baud rate is 9600
Related commands - Frame relay encapsulation
clear frame-relay
frame-relay map,
Related commands - PPP encapsulation
interface dialer,
Related commands - Verifying WAN configuration
show controllers,
show frame-relay

show ip access-control-list

Use the show ip access-control-list command to display the attributes of a specific
access control list on the current interface or all lists.
Syntax
show ip access-control-list {list_number | all | active-list-in |
active-list-out | active-list-in-out} [detailed]
Parameters
Parameter
list_
number
all
572 Avaya G250 and Avaya G350 CLI Reference
counters, frame-relay
show frame-relay pvc brief
interface FastEthernet,
show frame-relay fragment,
traffic, show interfaces,
Description
The access control list to display
Keyword specifying to display attributes
for all access control lists
class-dlci, interface serial,
interface serial
show frame-relay
show ip interface, show map-class frame-relay
map-class frame-relay,
lmi, show frame-relay
Possible Default
Values Value
show
pvc,