Snmp-Server Informs - Avaya G250 Reference

Example
G350-001(super)# snmp-server host 10.1.2.4 informs v3 auth John
udp-port 789 config generic
Related commands - SNMP access configuration
ip snmp-server,
snmp, show snmp
snmp user, show snmp user
community, snmp-server
user, snmp-server view
Related commands - SNMP trap configuration
clear snmp trap,
enable notifications,
Related commands - Dynamic trap manager
snmp-server dynamic-trap-manager

snmp-server informs

Use the snmp-server informs command to configure settings for SNMP inform messages.
Syntax
snmp-server informs [retries retries] [timeout timeout] [pending
pending]
Parameters
Parameter
retries
timeout
pending
set snmp community,
engineID, show snmp
summary,
engineID, snmp-server
set port trap, set snmp
snmp-server informs
Description
The maximum number of times to resend
an inform message
The number of seconds to wait for an
acknowledgement before resending an
inform message
The maximum allowable number of inform
messages that can be waiting for
acknowledgement at any given time. When
the maximum is reached, the oldest
pending inform messages are discarded.
set snmp retries, set snmp
group, show snmp
show snmp usertogroup,
group, snmp-server
trap, show snmp, snmp trap
Alphabetical listing of CLI commands
timeout, show port
retries, show snmp timeout,
show snmp view,
remote-user,
link-status, snmp-server
Possible Default
Values Value
3
3
25
Issue 1.1 June 2005
trap, show
show
snmp-server
snmp-server
747