Ip Dhcp Activate Pool - Avaya G250 Reference

CLI Commands
User level
read-write
Context
general
Example
To set the default gateway to the IP address 132.55.4.45, having a cost value of 4 with high
preference:
G350-001(super)# ip default-gateway 132.55.4.45 4 high
To set the default gateway to be the Serial interface:
G350-001(super)# ip default-gateway Serial 5/1:1.1 permanent
To remove the default gateway:
G350-001(super)# no ip default-gateway
Related commands
clear ip route,
route summary,

ip dhcp activate pool

When you create a DHCP pool, the pool remains inactive until you activate it. This allows you to
modify the pool configuration with no effect on network devices. Use the ip dhcp activate
pool command to activate the pool. Use the no form of this command to deactivate the pool.
When you deactivate a pool, the binding information of all IP addresses from the pool that were
allocated is erased.
Syntax
[no] ip dhcp activate pool pool_id
Parameters
Parameter
pool_id
User level
read-write
232 Avaya G250 and Avaya G350 CLI Reference
ip route, show ip route,
traceroute
Description
The pool index
show ip route best-match, show ip route static, show ip
Possible Default
Values Value
1-32