Set Peer (Peer Group) - Avaya G250 Reference

CLI Commands

set peer (peer group)

Use the set peer command to add a peer to the peer-group. Use the no form of the
command to remove a peer from the peer-group.
Syntax
[no] set peer {ip-address | hostname} [index index]
Parameters
Parameter
ip-address
hostname
index
User level
read-write
Context
crypto isakmp peer-group
Examples
G350-001(config-peer-grp:vpn.avaya.com)# set peer 149.49.52.135 1
Related commands
crypto isakmp
430 Avaya G250 and Avaya G350 CLI Reference
Description
The remote peer IP address
The remote peer hostname
A number specifying the relative position of
the peer within the peer-group.
If this optional parameter is not used, the
current peer is added at the end of the
peer-group list, and is assigned an index
following the last peer's index.
peer-group, description (ISAKMP peer
Possible
Values
1-5
group), show crypto isakmp peer-group
Default
Value